PROGRAMMABLE BOARDS
Showing 1–15 of 94 results
- Accessories, Accessories, Sensors
IR Sensor Module
Features of IR Sensor Module:-
- When the module detects obstacles in front of the signal, the circuit board green indicator light level, while the OUT port continuous output low-level signals, the module detects a distance of 2 ~ 10cm, detection angle 35 °, the detection distance can be potential adjustment with adjustment potentiometer clockwise, the increase in detection distance; counterclockwise adjustment potentiometer, the detection distance decreased.
- the sensor active infrared reflection detection, target reflectivity and shape of the detection distance of the key. The black minimum detection range, white maximum; small area object distance is small, a large area from the large.
- The sensor module output port OUT can be directly connected with the microcontroller IO port can also be driven directly to a 5V relay; Connection: VCC-VCC; GND-GND; OUT-IO.
- The comparator using LM393, stable.
- 3-5V DC power supply module can be used. When the power is turned on, the red power LED is lit.
- With the screw holes of 3mm, easy to install.
- Board size: 3.1CM * 1.5CM.
- Each module in the delivery has threshold comparator voltage adjustable via potentiometer, special circumstances, please do not adjust the potentiometer.
SKU: IR Sensor Module - Development Board
STM32F103C8T6 Arm STM32 Minimum System Development Board-Original
- Model: Stm32f103c8t6 core: Arm 32 cortex-m3 cpu debug mode: Swd 72mhz work frequency 64k flash memory, 20k sram
- 20-36v power, i/o reset(por/pdr) 4-16mhz crystal
- On-board mini usb interface, you can give the board power supply and usb communication
SKU: ST_STM32F103C8T6 - Accessories, Boards
Raspberry Pi Camera Board
- The board itself is tiny, at around 25mm x 20mm x 9mm and weighing in at just over 3g, making it perfect for mobile or other applications
- The sensor has a native resolution of 5 megapixel and has a fixed focus lens onboard
- The camera is capable of 2592 x 1944 pixel static images and also supports 1080p30, 720p60 and 640x480p60/90 video
SKU: Raspberry Pi Camera Board - Boards
Raspberry Pi 3 – Model B+ – 1.4Ghz 64Ghz Processor with 1 GB Ram (Latest & Original)
Specifications:-
- Processor: Broadcom BCM2837 Processor Quad core A53 (ARM v8) 64-bit SoC
- Memory: 1GB LPDDR2 SDRAM
- Bluetooth: Cypress BLE chip 2.4Ghz/5.0GHz IEEE 802.11ac
- Ethernet: Gigabit Ethernet over USB 2.0 (300Mbps max)
- USB: Four USB 2.0 ports
- Connection: GPIO Header 40-pin
- HDMI: 1 x full size
- Video: MIPI DSI display port, MIPI CSI camera port & 4 Pole stereo output and composite video port
- Multimedia: H.264, MPEG-4 decode (1080p30). H.264 encode (1080p30). OpenGL ES 1.1, 2.0 graphics.
- Storage: microSD card slot for loading operating system and data storage
- Power: USB connector for 5.1V / 2.5A dc
- POE enabled
SKU: Raspberry Pi 3 - Model B+ - 1.4Ghz 64Ghz Processor with 1 GB Ram (Latest & Original) - Accessories, Accessories, Sensors
Humidity & Temperature Basic Sensor Module DHT11
Features:
- Sensor is composed of a resistive humidity sensing component and an NTC temperature testing component and connects with 8-byte MCU
- MCU outputs a digital code
- Fast response and great anti-interference capability
- Durable and long lasting sensor
- Low power consumption
- Based on the DHT11 sensor architecture
Specifications:
- Operating Voltage: DC 3.3 – 5V
- Current: Max. 2.5mA
- Humidity Measurement range: 20% ~95% | ±5%RH
- Temperature Measurement range: 0℃~60℃ | ±2 ℃
- Connections; GND, Vcc, and Signal
- Depth 12mm, Height 7mm, Width 36mm
- Weight 5.0g
SKU: Humidity & Temperature Basic Sensor Module DHT11 - Accessories, Accessories, Sensors
PIR Motion Sensor Module HC-SR501 w/ Adjustable Delay Time & Output Signal – 1Pc
-24%Accessories, Accessories, SensorsPIR Motion Sensor Module HC-SR501 w/ Adjustable Delay Time & Output Signal – 1Pc
Key Features
- Detection range up to 20 feet
- Single bit output
- Jumper selection single or continuous trigger output mode
- 3-pin SIP header ready for breadboard or through-hole project
Specifications
- Operating voltage: DC 5 – 12V
- Static power consumption: 65 mA
- Output Signal: 3V TTL
- Detection Distance: Up to 6 meter (Adjustable)
- Sensing Range: Less than 120° degree angle, 6 meters
- Delay Time: 5 – 200s (Adjustable)
- Adjustable Trigger: L: non repeatable trigger – H: repeatable trigger
- Operating Temperature: -15 to +70°C
- Dimensions: 32 x 24mm, screw hole distance 28mm
SKU: PIR Motion Sensor Module HC-SR501 w/ Adjustable Delay Time & Output Signal - 1Pc - Accessories, Accessories, Sensors
Ultrasonic Distance Sensor Module – HC-SR04
Features:
- Sensor Type: Ultrasonic
- Output: Digital Sensor
- Voltage: 5VDC
- Detection distance: 2cm-400cm (0.02M – 4.0M)
- Static current: < 2mA
- Level output: high-5V
- High precision: up to 0.3cm
SKU: Ultrasonic Distance Sensor Module - HC-SR04 - Arduino, Boards, PROGRAMMABLE BOARDS
Arduino UNO R3 Development Board
Features:-
- Microcontroller: ATmega328P.
- Operating Voltage: 5V.
- Input Voltage: 7-12V.
- Digital I/O Pins: 14 (of which 6 provide PWM output).
- Analog Input Pins: 6.
- DC Current: 40mA.
- Flash Memory: 32 KB.
- SRAM: 2 KB.
- EEPROM: 1 KB.
- Clock Speed: 16 MHz.
Applications:-
- DIY project prototyping.
- Developing varied varieties of projects that require a code based control.
- Automation System development.
- Learning AVR programming.
- Entry level circuit designing.
SKU: Arduino UNO R3 Development Board - Development Board
NUCLEO-L432KC – Development Board
The STM32 Nucleo-32 board provides an affordable and flexible way for users to try out new concepts and build prototypes with the STM32 microcontroller, choosing from the various combinations of performance, power consumption and features. The Arduino™ nano connectivity makes it easy to expand the functionality of the STM32 Nucleo open development platform with a choice of specialized shields.The STM32 Nucleo-32 board does not require any separate probe as it integrates the ST-LINK/V2-1 debugger/programmer and it comes with the STM32 comprehensive software HAL library, together with various packaged software examples, as well as direct access to the ARM® mbed™ on-line resources.- Extension with Arduino nano connectivity
- ARM® mbed™ enabled
- On-board ST-LINK/V2-1 debugger/programmer with SWD connector
- Flexible power supply options (USB or external PSU)
- Three LEDs: USB comms, power and user programmable
- Reset push-button
- Supported by wide range of IDEs, including IAR, Keil and GCC-based IDEs
Applications
Test & Measurement, Embedded Design & Development, IoT (Internet of Things)
SKU: STM_NucleoL432 - Accessories, Accessories, Other Module, Robot Parts
SIM800L GPRS GSM Module Micro SIM Core Board QUAD-BAND Port TTL For Arduino
-50%Accessories, Accessories, Other Module, Robot PartsSIM800L GPRS GSM Module Micro SIM Core Board QUAD-BAND Port TTL For Arduino
- Ttl Serial Interface Compatible
- Microcontrollers,Compatible With Arduino
- This Sim800L Module Has A Set Of Ttl Level Serial Interface, A Set Of Power Supply Interface
- Imported From HongKong
- Warranty not applicable for this product
SKU: SIM800L GPRS GSM Module Micro SIM Core Board QUAD-BAND Port TTL For Arduino - Accessories, Sensors
MPU6050 – Triple Axis Gyro Accelerometer Module
Features:-
- Uses the popular MPU6050 IC
- MPU6050 contains a 3 axis Accelerometer and Gyroscope in a single package and simplifies design and usage. It also reduces cross axis alignment issues unlike other sensors with separate accelerometer and gyroscope ICs
- Digital I2C interface to read the output of the sensor
- Input Voltage: 2.3 – 3.4V
- Selectable Solder Jumpers on CLK, FSYNC and AD0
- Tri-Axis angular rate sensor (gyro) with a sensitivity up to 131 LSBs/dps and a full-scale range of ±250, ±500, ±1000, and ±2000dps
- Tri-Axis accelerometer with a programmable full scale range of ±2g, ±4g, ±8g and ±16g
- Embedded algorithms for run-time bias and compass calibration. No user intervention required
- Digital-output temperature sensor
SKU: MPU6050 - Triple Axis Gyro Accelerometer Module - Accessories, Modules, Motor Driver, Other Module, Shields
L298 Motor Driver Module Dual H Bridge DC Stepper for Arduino
-40%Accessories, Modules, Motor Driver, Other Module, ShieldsL298 Motor Driver Module Dual H Bridge DC Stepper for Arduino
- A great set of tools to develop ESP8266,CP2102 chip, Built-in Micro-USB,with flash and reset switches
- ESP8266 has IO pin leads directly download without resetting
- USB: Micro USB port for power, programming and debugging
SKU: L298 Motor Driver Module Dual H Bridge DC Stepper for Arduino