Arduino
Showing 1–15 of 75 results
- Accessories, Accessories, Sensors
IR Sensor Module
Features of IR Sensor Module:-
- When the module detects obstacles in front of the signal, the circuit board green indicator light level, while the OUT port continuous output low-level signals, the module detects a distance of 2 ~ 10cm, detection angle 35 °, the detection distance can be potential adjustment with adjustment potentiometer clockwise, the increase in detection distance; counterclockwise adjustment potentiometer, the detection distance decreased.
- the sensor active infrared reflection detection, target reflectivity and shape of the detection distance of the key. The black minimum detection range, white maximum; small area object distance is small, a large area from the large.
- The sensor module output port OUT can be directly connected with the microcontroller IO port can also be driven directly to a 5V relay; Connection: VCC-VCC; GND-GND; OUT-IO.
- The comparator using LM393, stable.
- 3-5V DC power supply module can be used. When the power is turned on, the red power LED is lit.
- With the screw holes of 3mm, easy to install.
- Board size: 3.1CM * 1.5CM.
- Each module in the delivery has threshold comparator voltage adjustable via potentiometer, special circumstances, please do not adjust the potentiometer.
SKU: IR Sensor Module - Accessories, Accessories, Sensors
Humidity & Temperature Basic Sensor Module DHT11
Features:
- Sensor is composed of a resistive humidity sensing component and an NTC temperature testing component and connects with 8-byte MCU
- MCU outputs a digital code
- Fast response and great anti-interference capability
- Durable and long lasting sensor
- Low power consumption
- Based on the DHT11 sensor architecture
Specifications:
- Operating Voltage: DC 3.3 – 5V
- Current: Max. 2.5mA
- Humidity Measurement range: 20% ~95% | ±5%RH
- Temperature Measurement range: 0℃~60℃ | ±2 ℃
- Connections; GND, Vcc, and Signal
- Depth 12mm, Height 7mm, Width 36mm
- Weight 5.0g
SKU: Humidity & Temperature Basic Sensor Module DHT11 - Accessories, Accessories, Sensors
PIR Motion Sensor Module HC-SR501 w/ Adjustable Delay Time & Output Signal – 1Pc
-24%Accessories, Accessories, SensorsPIR Motion Sensor Module HC-SR501 w/ Adjustable Delay Time & Output Signal – 1Pc
Key Features
- Detection range up to 20 feet
- Single bit output
- Jumper selection single or continuous trigger output mode
- 3-pin SIP header ready for breadboard or through-hole project
Specifications
- Operating voltage: DC 5 – 12V
- Static power consumption: 65 mA
- Output Signal: 3V TTL
- Detection Distance: Up to 6 meter (Adjustable)
- Sensing Range: Less than 120° degree angle, 6 meters
- Delay Time: 5 – 200s (Adjustable)
- Adjustable Trigger: L: non repeatable trigger – H: repeatable trigger
- Operating Temperature: -15 to +70°C
- Dimensions: 32 x 24mm, screw hole distance 28mm
SKU: PIR Motion Sensor Module HC-SR501 w/ Adjustable Delay Time & Output Signal - 1Pc - Accessories, Accessories, Sensors
Ultrasonic Distance Sensor Module – HC-SR04
Features:
- Sensor Type: Ultrasonic
- Output: Digital Sensor
- Voltage: 5VDC
- Detection distance: 2cm-400cm (0.02M – 4.0M)
- Static current: < 2mA
- Level output: high-5V
- High precision: up to 0.3cm
SKU: Ultrasonic Distance Sensor Module - HC-SR04 - Arduino, Boards, PROGRAMMABLE BOARDS
Arduino UNO R3 Development Board
Features:-
- Microcontroller: ATmega328P.
- Operating Voltage: 5V.
- Input Voltage: 7-12V.
- Digital I/O Pins: 14 (of which 6 provide PWM output).
- Analog Input Pins: 6.
- DC Current: 40mA.
- Flash Memory: 32 KB.
- SRAM: 2 KB.
- EEPROM: 1 KB.
- Clock Speed: 16 MHz.
Applications:-
- DIY project prototyping.
- Developing varied varieties of projects that require a code based control.
- Automation System development.
- Learning AVR programming.
- Entry level circuit designing.
SKU: Arduino UNO R3 Development Board - Accessories, Accessories, Other Module, Robot Parts
SIM800L GPRS GSM Module Micro SIM Core Board QUAD-BAND Port TTL For Arduino
-50%Accessories, Accessories, Other Module, Robot PartsSIM800L GPRS GSM Module Micro SIM Core Board QUAD-BAND Port TTL For Arduino
- Ttl Serial Interface Compatible
- Microcontrollers,Compatible With Arduino
- This Sim800L Module Has A Set Of Ttl Level Serial Interface, A Set Of Power Supply Interface
- Imported From HongKong
- Warranty not applicable for this product
SKU: SIM800L GPRS GSM Module Micro SIM Core Board QUAD-BAND Port TTL For Arduino - Accessories, Sensors
MPU6050 – Triple Axis Gyro Accelerometer Module
Features:-
- Uses the popular MPU6050 IC
- MPU6050 contains a 3 axis Accelerometer and Gyroscope in a single package and simplifies design and usage. It also reduces cross axis alignment issues unlike other sensors with separate accelerometer and gyroscope ICs
- Digital I2C interface to read the output of the sensor
- Input Voltage: 2.3 – 3.4V
- Selectable Solder Jumpers on CLK, FSYNC and AD0
- Tri-Axis angular rate sensor (gyro) with a sensitivity up to 131 LSBs/dps and a full-scale range of ±250, ±500, ±1000, and ±2000dps
- Tri-Axis accelerometer with a programmable full scale range of ±2g, ±4g, ±8g and ±16g
- Embedded algorithms for run-time bias and compass calibration. No user intervention required
- Digital-output temperature sensor
SKU: MPU6050 - Triple Axis Gyro Accelerometer Module - Accessories, Modules, Motor Driver, Other Module, Shields
L298 Motor Driver Module Dual H Bridge DC Stepper for Arduino
-40%Accessories, Modules, Motor Driver, Other Module, ShieldsL298 Motor Driver Module Dual H Bridge DC Stepper for Arduino
- A great set of tools to develop ESP8266,CP2102 chip, Built-in Micro-USB,with flash and reset switches
- ESP8266 has IO pin leads directly download without resetting
- USB: Micro USB port for power, programming and debugging
SKU: L298 Motor Driver Module Dual H Bridge DC Stepper for Arduino - Arduino, Boards, PROGRAMMABLE BOARDS
Arduino Mega 2560 R3 Board with USB Cable
Specifications:-
- Microcontroller: ATmega2560
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 54 (of which 15 provide PWM output)
- Analog Input Pins: 16
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA
- Flash Memory: 256 KB of which 8 KB used by bootloader
- SRAM: 8 KB
- EEPROM: 4 KB
- Clock Speed: 16 MHz
- USB Host Chip: MAX3421E
- Length:101.98mm/4.01in
- Width:53.63mm/2.11in
- Height:15.29mm/0.60in
SKU: Arduino Mega 2560 R3 Board with USB Cable - Boards
Arduino Due Microcontroller Board
The Due is Arduino’s first ARM-based Arduino development board. This board is based on a powerful 32bit CortexM3 ARM microcontroller made programmable through the familiar Arduino IDE. It increases the computing power available to Arduino users keeping the language as compatible as possible so that many programs will be migrated in a matter of minutes! The Arduino Due has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), an 84 MHz clock, a USB-OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button. There are also some cool features like DACs, Audio, DMA , an experimental multi tasking library and more. Note: Unlike other Arduino boards, the Arduino Due board runs at 3.3V. The maximum voltage that the I/O pins can tolerate is 3.3V. Providing higher voltages, like 5V to an I/O pin could damage the board. Features: Micro-controller: AT91SAM3X8E Operating Voltage: 3.3V Recommended Input Voltage: 7-12V Min-Max Input Voltage: 6-20V Digital I/O Pins: 54 (of which 12 provide PWM output) Analog Input Pins: 12 Analog Outputs Pins: 2 Total DC Output Current on all I/O lines: 130 mA DC Current for 3.3V Pin: 800 mA DC Current for 5V Pin: 800 mA Flash Memory: 512 KB all available for the user applications SRAM: 96 KB (two banks: 64KB and 32KB) Clock Speed: 84 MHz
SKU: Arduino_due - Accessories, Driver & Interface ICs
CP2102 USB to TTL USB UART Module Serial Converter
- Stable and reliable chipset CP2102 USB specification 2.0 compliant with full-speed 12 Mbps
- Standard USB type A male and TTL 5pin
- Supports windows vista or xp or server 2003/200, Mac OS-X/OS-9, Linux
- Temperature Range: -40 to +85 degree Celsius
SKU: Cp2102