Arduino
Showing 1–15 of 75 results
- Accessories, Modules, Motor Driver, Other Module, Shields
L298 Motor Driver Module Dual H Bridge DC Stepper for Arduino
-40%Accessories, Modules, Motor Driver, Other Module, ShieldsL298 Motor Driver Module Dual H Bridge DC Stepper for Arduino
- A great set of tools to develop ESP8266,CP2102 chip, Built-in Micro-USB,with flash and reset switches
- ESP8266 has IO pin leads directly download without resetting
- USB: Micro USB port for power, programming and debugging
SKU: L298 Motor Driver Module Dual H Bridge DC Stepper for Arduino - Accessories, Sensors
MPU6050 – Triple Axis Gyro Accelerometer Module
Features:-
- Uses the popular MPU6050 IC
- MPU6050 contains a 3 axis Accelerometer and Gyroscope in a single package and simplifies design and usage. It also reduces cross axis alignment issues unlike other sensors with separate accelerometer and gyroscope ICs
- Digital I2C interface to read the output of the sensor
- Input Voltage: 2.3 – 3.4V
- Selectable Solder Jumpers on CLK, FSYNC and AD0
- Tri-Axis angular rate sensor (gyro) with a sensitivity up to 131 LSBs/dps and a full-scale range of ±250, ±500, ±1000, and ±2000dps
- Tri-Axis accelerometer with a programmable full scale range of ±2g, ±4g, ±8g and ±16g
- Embedded algorithms for run-time bias and compass calibration. No user intervention required
- Digital-output temperature sensor
SKU: MPU6050 - Triple Axis Gyro Accelerometer Module - Boards
 Arduino Due Microcontroller BoardÂ
The Due is Arduino’s first ARM-based Arduino development board. This board is based on a powerful 32bit CortexM3 ARM microcontroller made programmable through the familiar Arduino IDE. It increases the computing power available to Arduino users keeping the language as compatible as possible so that many programs will be migrated in a matter of minutes! The Arduino Due has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), an 84 MHz clock, a USB-OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button. There are also some cool features like DACs, Audio, DMA , an experimental multi tasking library and more. Note: Unlike other Arduino boards, the Arduino Due board runs at 3.3V. The maximum voltage that the I/O pins can tolerate is 3.3V. Providing higher voltages, like 5V to an I/O pin could damage the board. Features: Micro-controller: AT91SAM3X8E Operating Voltage: 3.3V Recommended Input Voltage: 7-12V Min-Max Input Voltage: 6-20V Digital I/O Pins: 54 (of which 12 provide PWM output) Analog Input Pins: 12 Analog Outputs Pins: 2 Total DC Output Current on all I/O lines: 130 mA DC Current for 3.3V Pin: 800 mA DC Current for 5V Pin: 800 mA Flash Memory: 512 KB all available for the user applications SRAM: 96 KB (two banks: 64KB and 32KB) Clock Speed: 84 MHz
SKU: Arduino_due - Accessories, Driver & Interface ICs
CP2102 USB to TTL USB UART Module Serial Converter
- Stable and reliable chipset CP2102 USB specification 2.0 compliant with full-speed 12 Mbps
- Standard USB type A male and TTL 5pin
- Supports windows vista or xp or server 2003/200, Mac OS-X/OS-9, Linux
- Temperature Range: -40 to +85 degree Celsius
SKU: Cp2102 - Accessories, Kits
Arduino Starter Kit
Kit Includes :
- Arduino Uno R3 – 1 Pc
- Arduino Uno Cable – 1Pc
- Transistor BC547Â – 3Pc
- IR sensor Module – 1Pc
- Potentiometer 22K or 100k or 47 K 1 PC
- HW 9 Watt Battery – 1P
- LDR -1Pc
- 5mm LED – 5Pc
- Male Male,Female Female,Male Female Connecting Wires : 5 Pc Each
SKU: Arduino_kit - Accessories, Accessories, Boards, Modules
Sim900A Gsm Modem Module with Sma Antenna
- Compatible with arduino, raspberry pi, arm, avr, pic, 8051, etc
- Best suited for gsm based microcontroller projects (better than sim300 and other gsm modems)
- Option for connecting mic and speaker directly to gsm modem for calls (line in also available)
- Supports communication through rs232 with db9 connector, ttl pins and i2c pins^call sms gprs facility – mic input, line input and speaker output pins^
SKU: Sim900_A - Accessories, Accessories, Hardware Parts
Bracket for Ultrasonic Sensor Module – HC-SR04
Mounting Bracket for Ultrasonic Sensor Module – HC-SR04
Features:
- Thickness :2.8mm – 3.1mm
- Inner diameter: 16mm
- Diameter of mounting hole: 3.8mm
- Material: acrylic
- Usage: fixed ultrasonic sensor modules
* Product Images are shown for illustrative purposes only and may differ from actual product.
SKU: Bracket_HCSR04 - Accessories, Accessories, Sensors
NRF24L01 + 2.4GHZ Wireless Transceiver module for Arduino
1 low working voltage: 1.9 ~ 3.6V low voltage operation 2 high speed: 2Mbps, due to the transmission time is very short, greatly reducing the collision phenomenon in the wireless transmission (air transmission rate software set 1Mbps or 2Mbps) 3 multi frequency: 125 frequency points, meet the multipoint communication and frequency hopping communication needs 4 tiny: built-in 2.4GHz antenna, small volume, 15x29mm (including antenna) 5 low power: when working in answer mode communication, air transport and starting time of fast, greatly reducing current consumption. 6 low cost: the NRF24L01 integrates all the relevant RF agreements and high-speed signal processing, such as: automatic retransmission of lost packets and automatically generate a response signal, SPI interface, NRF24L01 can use the hardware SPI port connection or by SCM I/O port simulation, internal FIFO and all kinds of high and low speed microprocessor interface, easy to use low cost microcontroller.
SKU: sensor_nrf24l01