•  Arduino Due Microcontroller Board 

    The Due is Arduino’s first ARM-based Arduino development board. This board is based on a powerful 32bit CortexM3 ARM microcontroller made programmable through the familiar Arduino IDE. It increases the computing power available to Arduino users keeping the language as compatible as possible so that many programs will be migrated in a matter of minutes! The Arduino Due has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), an 84 MHz clock, a USB-OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button. There are also some cool features like DACs, Audio, DMA , an experimental multi tasking library and more. Note: Unlike other Arduino boards, the Arduino Due board runs at 3.3V. The maximum voltage that the I/O pins can tolerate is 3.3V. Providing higher voltages, like 5V to an I/O pin could damage the board. Features: Micro-controller: AT91SAM3X8E Operating Voltage: 3.3V Recommended Input Voltage: 7-12V Min-Max Input Voltage: 6-20V Digital I/O Pins: 54 (of which 12 provide PWM output) Analog Input Pins: 12 Analog Outputs Pins: 2 Total DC Output Current on all I/O lines: 130 mA DC Current for 3.3V Pin: 800 mA DC Current for 5V Pin: 800 mA Flash Memory: 512 KB all available for the user applications SRAM: 96 KB (two banks: 64KB and 32KB) Clock Speed: 84 MHz

    1,475.001,699.00
  • Arduino Leonardo R3 Board

    • Microcontroller: ATmega32u4
    • Operating voltage: 5V
    • Input voltage(recommended): 7V – 12V Input voltage(limits): 6V – 20V
    • Digital I / O pins: 20 PWM channels: 7
    • PWM channels: 7 Analog input channels: 12 DC current per I / O pin: 40mA
    799.001,198.00

    Arduino Leonardo R3 Board

    799.001,198.00
  • Arduino Mega 2560 R3 Board with USB Cable

    Specifications:-

    • Microcontroller: ATmega2560
    • Operating Voltage: 5V
    • Input Voltage (recommended): 7-12V
    • Input Voltage (limits): 6-20V
    • Digital I/O Pins: 54 (of which 15 provide PWM output)
    • Analog Input Pins: 16
    • DC Current per I/O Pin: 40 mA
    • DC Current for 3.3V Pin: 50 mA
    • Flash Memory: 256 KB of which 8 KB used by bootloader
    • SRAM: 8 KB
    • EEPROM: 4 KB
    • Clock Speed: 16 MHz
    • USB Host Chip: MAX3421E
    • Length:101.98mm/4.01in
    • Width:53.63mm/2.11in
    • Height:15.29mm/0.60in
    859.001,299.00
  • Arduino NANO V3.0 Development Board – Clone Compatible Model

    Specifications:-

    • Microcontroller                        Atmel ATmega328 SMD Package
    • Operating Voltage (logic level)  5 V
    • Input Voltage (recommended)  7-12 V
    • Input Voltage (limits)               6-20 V
    • Digital I/O Pins                        14 (of which 6 provide PWM output)
    • Analog Input Pins                    8
    • DC Current per I/O Pin            40 mA
    • Flash Memory                         32 KB (of which 2KB used by bootloader)
    • SRAM                                     2 KB
    • EEPROM                                 1 KB
    • Clock Speed                           16 MHz
    • Dimensions                            0.70” x 1.70
    319.00399.00
  • Arduino Pro Mini – ATMEGA 328P – AU 5V -16Mhz

    • New mini atmega328 replace aTmega128 for Arduino-compatible nano module
    • Package Included: 1 x Arduino pro min atmega328p board, 3 x gilded pin
    • Analog Pins: 8 Digital I or Os: 14
    • Supports auto-reset
    249.00349.00
  • Arduino UNO R3 Development Board

    Features:-

    • Microcontroller: ATmega328P.
    • Operating Voltage: 5V.
    • Input Voltage: 7-12V.
    • Digital I/O Pins: 14 (of which 6 provide PWM output).
    • Analog Input Pins: 6.
    • DC Current: 40mA.
    • Flash Memory: 32 KB.
    • SRAM: 2 KB.
    • EEPROM: 1 KB.
    • Clock Speed: 16 MHz.

    Applications:-

    • DIY project prototyping.
    • Developing varied varieties of projects that require a code based control.
    • Automation System development.
    • Learning AVR programming.
    • Entry level circuit designing.
    440.00499.00
  • Arduino UNO R3 SMD Atmega328P Board – Clone Compatible Model

    Specifications:-

    Microcontroller : ATmega328 SMD.

    Operating Voltage : 5V.

    Supply Voltage recommended :  7-12V DC.

    Digital I/O Pins : 14 (of which 6 provide PWM output).

    Analog Input Pins : 6.

    DC Current per I/O Pin : 40 mA.

    DC Current for 3.3V Pin : 50 mA.

    Flash Memory : 32 KB (ATmega328) of which 0.5 KB used by bootloader.

    SRAM : 2 KB (ATmega328).

    EEPROM : 1 KB (ATmega328).

    Clock Speed : 16 MHz.

    399.00449.00
  • GPS Module SKG13

    GPS Module SKG13 …

    Easily Compatible with Arduino.

    Best quality SMA antenna.

    Best to make your own GPS Tracker System

    1,300.001,699.00

    GPS Module SKG13

    1,300.001,699.00
  • Lilypad Arduino 328 Main Board

    The LilyPad Arduino Main Board is based on the ATmega328V. It features all digital and analog pins you would find on the Arduino UNO R3 (Digital 0-13 & Analog 0-5). to save space and make the board lighter they have removed the USB-port and USB to TTL chip, there for the Lily pad requires an FTDI to be programmed.

    449.00499.00
  • NODEMCU LOLiN – ESP8266 Wifi Development Board

    Specification of Node-MCU IoT Module :-

    It is based on ESP8266, integates GPIO, PWM, IIC, 1-Wire and ADC all in one board.

    Power your developement in the fastest way combinating with NodeMCU Firmware!

    USB-TTL included, plug&play

    10 GPIO, every GPIO can be PWM, I2C, 1-wire

    Features of Node-MCU IoT Module:-

    Open source IoT Platform

    Easily Programmable

    Low cost & Simple to Implement

    WI-FI enabled

    309.00499.00
  • NodeMcu WiFi Development Board – ESP8266

    Specifications and Features of Node MCU:-

    • 11 b/g/n Wi-Fi Direct (P2P), soft-AP
    • Integrated TCP/IP protocol stack
    • CP2102 Serial / USB Chip
    • +19.5dBm output power in 802.11b mode
    • 4MB Flash Memory
    • Integrated low power 32-bit CPU
    • SDIO 1.1 / 2.0, SPI, UART
    • Dimensions – 49 x 24.5 x 13mm
    • Integrated TR switch, balun, LNA, power amplifier and matching network
    • Integrated PLLs, regulators, DCXO and power management units
    • On board USB to serial chip to easily program and upload codes from the Arduino IDE
    • Embeds logic level converter circuits
    • Has on board 3.3V regulator to ensure enough power to function as your go-to WiFi chip!
    • Easy access to the GPIO pins for easy prototyping
    • ESP-12E Processor
    • Easy to use breadboard friendly form factor
    • Voltage Regulator / Converter, excellent DC to DC conversion, super efficient
    339.00499.00
  • Sim900A Gsm Modem Module with Sma Antenna

    • Compatible with arduino, raspberry pi, arm, avr, pic, 8051, etc
    • Best suited for gsm based microcontroller projects (better than sim300 and other gsm modems)
    • Option for connecting mic and speaker directly to gsm modem for calls (line in also available)
    • Supports communication through rs232 with db9 connector, ttl pins and i2c pins^call sms gprs facility – mic input, line input and speaker output pins^
    1,150.001,499.00

Main Menu