No products in the cart.
PROGRAMMABLE BOARDS
Showing 31–45 of 94 results
- Accessories, Accessories, Breadboard
Generic Elementz Nickel Plated 840 Points Bread Board or Solderless Piecesb Circuit Test Board, White
-40%
Accessories, Accessories, BreadboardGeneric Elementz Nickel Plated 840 Points Bread Board or Solderless Piecesb Circuit Test Board, White
- 840 Tie Points: 128 groups of 5 connected terminals, 8 bus of 25 connected terminals
- Reusable for fast build a prototype of an electronic circuit will accept transistors, diodes, LEDS, resistors, capacitors and virtually all types of components
- No soldering required
- Can modify or revise the circuits easily
- Fit for jumper wire of 0.8mm diameter standard 2.54mm hole spacing
- Adhesive sheet on the back side of the board, multiple breadboards can be spliced together too
SKU: Generic Elementz Nickel Plated 840 Points Bread Board or Solderless Piecesb Circuit Test Board, White - Accessories, Accessories
HDMI to VGA Converter Adapter Cable (Black ) – 1Pc
- This is a unidirectional device, it works from HDmi to vga, not in reverse. It means your source should be HDmi and destination should be vga., 1. Connect the HDmi connector of the adapter to your HDmi device (dvd, ps3, xbox360, Blu-ray, media player, etc….)
- Turn on the HDmi device and the display device and enjoy, best product, HDmi to vga converter, no audio output (because vga (video graphics array) doesn’t support audio)
- Connect the vga cable of your monitor or projector to the vga female port of the adapter
SKU: HDMI to VGA Converter Adapter Cable (Black ) - 1Pc - Accessories, USB CABLE & PC peripherals
High Speed USB 2.0 Cable For mobile charging||USB Data Cable
-40%
Accessories, USB CABLE & PC peripheralsHigh Speed USB 2.0 Cable For mobile charging||USB Data Cable
- White
- Fast Charging Speed
- White
Fast Charging SpeedGenuine OutputBest Quality100% Compatible
- Genuine OutputBest Quality100% Compatible
- Brand: SAP
- Current Max: 1.0 Amp
SKU: High Speed USB 2.0 Cable For mobile charging||USB Data Cable - Accessories, Accessories, Sensors
Humidity & Temperature Basic Sensor Module DHT11
Features:
- Sensor is composed of a resistive humidity sensing component and an NTC temperature testing component and connects with 8-byte MCU
- MCU outputs a digital code
- Fast response and great anti-interference capability
- Durable and long lasting sensor
- Low power consumption
- Based on the DHT11 sensor architecture
Specifications:
- Operating Voltage: DC 3.3 – 5V
- Current: Max. 2.5mA
- Humidity Measurement range: 20% ~95% | ±5%RH
- Temperature Measurement range: 0℃~60℃ | ±2 ℃
- Connections; GND, Vcc, and Signal
- Depth 12mm, Height 7mm, Width 36mm
- Weight 5.0g
SKU: Humidity & Temperature Basic Sensor Module DHT11 - Accessories, Accessories, Sensors
Humidity & Temperature Wide Detection Range Sensor Module DHT22
-18%
Accessories, Accessories, SensorsHumidity & Temperature Wide Detection Range Sensor Module DHT22
Features:
- Sensor is composed of a resistive humidity sensing component and an NTC temperature testing component and connects with 8-byte MCU
- MCU outputs a digital code
- Fast response and great anti-interference capability
- Durable and long lasting sensor
- Low power consumption
- Based on the DHT22 & AM2302 sensor architecture
Specifications:
- Operating Voltage: DC 3.3 – 5V
- Current: Max. 2.5mA
- Humidity Measurement range: 0% ~100% | ±2-5%RH
- Temperature Measurement range: -40℃~80℃ | ±0.5 ℃
- Sampling rate: 0.5Hz every 2 seconds
- Connections; GND, Vcc, and Signal
- 4.2 cm x 1.5 cm x 10.0 cm
- Weight 7.0g
SKU: Humidity & Temperature Wide Detection Range Sensor Module DHT22 - Accessories, Accessories, LCD, Other Module
I2C Serial Interface Board Module
This Is Another Great Iic/I2C/Twi/Spi Serial Interface
As The Pin Resources Of Arduino Controller Is Limited, Your Project May Be Not Able To Use Normal Lcd Shield After Connected With A Certain Quantity Of Sensors Or Sd Card
I2C Address: 0X20~0X27 (The Original Address Is 0X27,You Can Change It Yourself) Supply Voltage: 5V
The Backlight And Contrast Is Adjusted By Potentiometer
Come With 2 Iic Interface, Which Can Be Connected By Dupont Line Or Iic Dedicated CableSKU: board_i2c - Accessories, Accessories, other ics, Sensors, Transistors
IC TSOP1738 – 2Pcs
TSOP module has an inbuilt control circuit for amplifying the coded pulses from the IR transmitter. A signal is generated when PIN photodiode receives the signals. This input signal is received by an automatic gain control (AGC). For a range of inputs, the output is fed back to AGC in order to adjust the gain to a suitable level. The signal from AGC is passed to a band pass filter to filter undesired frequencies. After this, the signal goes to a demodulator and this demodulated output drives an npn transistor. The collector output of the transistor is obtained at pin 3 of TSOP module.Members of TSOP17xx series are sensitive to different centre frequencies of the IR spectrum. For example TSOP1738 is sensitive to 38 kHz whereas TSOP1740 to 40 kHz centre frequency.SKU: IC TSOP1738 - 2Pcs - Accessories, Accessories, Sensors
IR Sensor Module
Features of IR Sensor Module:-
- When the module detects obstacles in front of the signal, the circuit board green indicator light level, while the OUT port continuous output low-level signals, the module detects a distance of 2 ~ 10cm, detection angle 35 °, the detection distance can be potential adjustment with adjustment potentiometer clockwise, the increase in detection distance; counterclockwise adjustment potentiometer, the detection distance decreased.
- the sensor active infrared reflection detection, target reflectivity and shape of the detection distance of the key. The black minimum detection range, white maximum; small area object distance is small, a large area from the large.
- The sensor module output port OUT can be directly connected with the microcontroller IO port can also be driven directly to a 5V relay; Connection: VCC-VCC; GND-GND; OUT-IO.
- The comparator using LM393, stable.
- 3-5V DC power supply module can be used. When the power is turned on, the red power LED is lit.
- With the screw holes of 3mm, easy to install.
- Board size: 3.1CM * 1.5CM.
- Each module in the delivery has threshold comparator voltage adjustable via potentiometer, special circumstances, please do not adjust the potentiometer.
SKU: IR Sensor Module
