Accessories
Showing 1–15 of 61 results
- Accessories, Accessories, Boards, Modules
Sim900A Gsm Modem Module with Sma Antenna
- Compatible with arduino, raspberry pi, arm, avr, pic, 8051, etc
- Best suited for gsm based microcontroller projects (better than sim300 and other gsm modems)
- Option for connecting mic and speaker directly to gsm modem for calls (line in also available)
- Supports communication through rs232 with db9 connector, ttl pins and i2c pins^call sms gprs facility – mic input, line input and speaker output pins^
SKU: Sim900_A - Accessories, Accessories, Hardware Parts
Bracket for Ultrasonic Sensor Module – HC-SR04
Mounting Bracket for Ultrasonic Sensor Module – HC-SR04
Features:
- Thickness :2.8mm – 3.1mm
- Inner diameter: 16mm
- Diameter of mounting hole: 3.8mm
- Material: acrylic
- Usage: fixed ultrasonic sensor modules
* Product Images are shown for illustrative purposes only and may differ from actual product.
SKU: Bracket_HCSR04 - Accessories, Accessories, Sensors
NRF24L01 + 2.4GHZ Wireless Transceiver module for Arduino
1 low working voltage: 1.9 ~ 3.6V low voltage operation 2 high speed: 2Mbps, due to the transmission time is very short, greatly reducing the collision phenomenon in the wireless transmission (air transmission rate software set 1Mbps or 2Mbps) 3 multi frequency: 125 frequency points, meet the multipoint communication and frequency hopping communication needs 4 tiny: built-in 2.4GHz antenna, small volume, 15x29mm (including antenna) 5 low power: when working in answer mode communication, air transport and starting time of fast, greatly reducing current consumption. 6 low cost: the NRF24L01 integrates all the relevant RF agreements and high-speed signal processing, such as: automatic retransmission of lost packets and automatically generate a response signal, SPI interface, NRF24L01 can use the hardware SPI port connection or by SCM I/O port simulation, internal FIFO and all kinds of high and low speed microprocessor interface, easy to use low cost microcontroller.
SKU: sensor_nrf24l01 - Accessories, Accessories, LCD, Other Module
I2C Serial Interface Board Module
This Is Another Great Iic/I2C/Twi/Spi Serial Interface
As The Pin Resources Of Arduino Controller Is Limited, Your Project May Be Not Able To Use Normal Lcd Shield After Connected With A Certain Quantity Of Sensors Or Sd Card
I2C Address: 0X20~0X27 (The Original Address Is 0X27,You Can Change It Yourself) Supply Voltage: 5V
The Backlight And Contrast Is Adjusted By Potentiometer
Come With 2 Iic Interface, Which Can Be Connected By Dupont Line Or Iic Dedicated CableSKU: board_i2c - Accessories, Boards
Raspberry Pi Camera Board
- The board itself is tiny, at around 25mm x 20mm x 9mm and weighing in at just over 3g, making it perfect for mobile or other applications
- The sensor has a native resolution of 5 megapixel and has a fixed focus lens onboard
- The camera is capable of 2592 x 1944 pixel static images and also supports 1080p30, 720p60 and 640x480p60/90 video
SKU: Raspberry Pi Camera Board - Accessories, Accessories, Wires & Cables
Jumper Wires Female To Female/Breadboard Jumper Wires (FF 40)
-23%Accessories, Accessories, Wires & CablesJumper Wires Female To Female/Breadboard Jumper Wires (FF 40)
- 40 pc female to female jumper wire ;Each cable length about 20cm or 8-inch
- The male ends meant for insertion into standard 0.1 inch (2.54mm) female sockets and the female ends are meant for insertion onto standard 0.1 inch (2.54mm) male headers
- Suitable for Arduino breadboard kit project, PCB project, pc motherboard, etc
- aptechdeals.com Building Kits
- Through the pin connection, without welding, fit for fast circuit test.
SKU: Jumper Wires Female To Female/Breadboard Jumper Wires (FF 40) - Accessories, Accessories, Wires & Cables
Jumper Wires Male-male , male-female ,female -female -20 Pcs each
-10%Accessories, Accessories, Wires & CablesJumper Wires Male-male , male-female ,female -female -20 Pcs each
Jumper Wires to connect differernt components on breadboard . Best Quality Copper Plated High Conductivity
Package includes :
20 Pcs Male -Male Jumper Wires
20 Pcs Male -Female Jumper Wires
20 Pcs Female -Female Jumper Wires
SKU: Jumper Wires Male-male , male-female ,female -female -20 Pcs each - Accessories, Kits, LCD
TFT LCD 5 Inch 800 x 480 HD Touch Screen For Raspberry PI 3 Model B/2 Model B/B+/A+/B
-8%Accessories, Kits, LCDTFT LCD 5 Inch 800 x 480 HD Touch Screen For Raspberry PI 3 Model B/2 Model B/B+/A+/B
- This 5 inch HDMI TFT LCD touch screen is special designed for Raspberry Pi. Note : Raspberry Pi not included.
- Power: 5V Power via GPIO from Raspberry pi Display Type: 5 inch TFT LCD Resolution: 800×480 Touchscreen: SPI Via Raspberry pi Dimensions: 120mm x 74mm x 7mm Weight without package: 125g Weight with package: 145g
- 800×480 resolution(HD), support for touch control Compatible and can be plugged directly into any version of Raspberry Pi (only except the first generation Pi model B which requires an HDMI cable.) User Manual provided, the official Raspberry Pi drive available Support any Raspberry Pi Image, Ubuntu, LinuxMint, Win 10 IOT and any more Universal HDMI display is not limited to raspberry pi (with resolution requirements) When only use for display only, does not occupy any I/O
- Package includes: 1 x 5inch HDMI LCD module 1 x HDMI connector 1 x Touch pen 1 x RPi screws pack (4pcs)
- http://wiki.52pi.com/index.php/5-Inch-800×480-HDMI-GPIO-Touch-Screen_SKU:EP-0072
SKU: TFT LCD 5 Inch 800 x 480 HD Touch Screen For Raspberry PI 3 Model B/2 Model B/B+/A+/B