SENSORS AND MODULES
Showing 1–15 of 60 results
- Sensors
Turbidity Sensor || Turbidity Detection Sensor Module with Probe Kit
- Working voltage: DC5V; Operating Current : 30mA (MAX)
- Response time : <500ms
- Insulation Resistance : 100M Ω[Min];
- Works with microcontroller – Can’t work alone (No Display)
- the output way: Analog output 0-4.5V
SKU: II_Turbidity Sensor - Other Module, Surgical Product
UVC Sterilizer for iphone Mobile
UVC Sterilizer for iPhone Mobile|| UVC Sanitization
Product Parameters:
- Designed for SmartPhone
- Model : AX20-06
- Working Voltage 5v
- Power : 0.4 Watt
- Color : Black / White
Operating Guide:
- Plug into USB of adaptable smartphone,Plug and Use
- For smartphone manually open OTG and use it in bright screen condition
Caution:
- Don’t shine into eyes
- Don’t allow children to ude aloneÂ
- Don’t Irradiate the screen and use the light for a long time
- Please select the adaptable interface prevent accidental purchase
SKU: II_UVC_iphone - Other Module, Surgical Product
UVC Sterilizer for Type C mobile Phone
UVC Sterilizer for Type C mobile Phone || UVC Sanitization
Product Parameters:
- Designed for SmartPhone
- Model : AX20-06
- Working Voltage 5v
- Power : 0.4 Watt
- Color : Black / White
Operating Guide:
- Plug into USB of adaptable smartphone,Plug and Use
- For smartphone manually open OTG and use it in bright screen condition
Caution:
- Don’t shine into eyes
- Don’t allow children to ude aloneÂ
- Don’t Irradiate the screen and use the light for a long time
- Please select the adaptable interface prevent accidental purchase
SKU: II_UVC_typeC - Sensors
ADXL345 3 Axis Digital Acceleration of Gravity Tilt Module for Arduino
- The adxl345 is a small, thin, low power, 3 axis mems accelerometer with high resolution (13bit) measurement at up to plus or 16 g
- Digital output data is formatted as 16bit two’s complement and is accessible through either an spi (3 or 4wire) or i2c digital interface
- Spi or i2c communication
SKU: Sensor_199 - Sensors
SOILSENSOR Soil Moisture Sensor
- This is a simple water sensor that can be used to detect soil moisture
- Can be used in module plant waterer device, and the plants in your garden no need people to manage
- Operating voltage: 3
- Module dual output mode, digital output, analog output more accurate
SKU: Sensor_soil - Sensors
HX711 Load Cell Amplifier Module
HX711 module is a Load Cell Amplifier breakout board for the HX711 IC that allows you to easily read load cells to measure weight. This module uses 24 high precision A/D converter chip HX711. It is a specially designed for the high precision electronic scale design, with two analog input channel, the internal integration of 128 times the programmable gain amplifier. The input circuit can be configured to provide a bridge type pressure bridge (such as pressure, weighing sensor mode), is of high precision, low cost is an ideal sampling front-end module.
HX711 is an IC that allows you to easily integrate load cell into your project. No need of any amplifiers or dual power supply just use this board and you can easily interface it to any micro-controller to measure weight.
The HX711 uses a two wire interface (Clock and Data) for communication. Compared with other chips, HX711 has added advantages such as high integration, fast response, immunity, and other features improving the total performance and reliability. Finally it’s one among the best choices for electronic enthusiasts. The chip lowers the cost of the electronic scale,at the same time,improving performance and reliability.
SKU: Sensor_hx711 - Hardware Parts, Sensors
3Kg Load cell – Electronic Weighing Scale Sensor
A load cell is a transducer that is used to create an electrical signal whose magnitude is directly proportional to the force being measured. The various types of load cells include hydraulic load cells, pneumatic load cells and strain gauge load cells.
This is a standard load cell for measuring weight upto 3 Kg. The output of the load cell is in mili-volts and cannot be directly measured by a micro-controller. So an ADC with high resolution or an instrumentation amplifier is required to make the output of the load cell readable to a micro-controller.
SKU: Sensor_LC3kg - Accessories, Accessories, Sensors
NRF24L01 + 2.4GHZ Wireless Transceiver module for Arduino
1 low working voltage: 1.9 ~ 3.6V low voltage operation 2 high speed: 2Mbps, due to the transmission time is very short, greatly reducing the collision phenomenon in the wireless transmission (air transmission rate software set 1Mbps or 2Mbps) 3 multi frequency: 125 frequency points, meet the multipoint communication and frequency hopping communication needs 4 tiny: built-in 2.4GHz antenna, small volume, 15x29mm (including antenna) 5 low power: when working in answer mode communication, air transport and starting time of fast, greatly reducing current consumption. 6 low cost: the NRF24L01 integrates all the relevant RF agreements and high-speed signal processing, such as: automatic retransmission of lost packets and automatically generate a response signal, SPI interface, NRF24L01 can use the hardware SPI port connection or by SCM I/O port simulation, internal FIFO and all kinds of high and low speed microprocessor interface, easy to use low cost microcontroller.
SKU: sensor_nrf24l01 - Sensors
MQ135 MQ-135 Air Quality Sensor Hazardous Gas Detection Module For Arduino
Input voltage: DC5V power (current): 150mA
Analog output with increasing concentration, the higher the concentration, the higher the voltage.
A hazardous gas detection apparatus for the family, the environment. Suitable for ammonia, aromatic compounds, sulfur, benzene vapor, smoke and other gases harmful gas detection. Gas-sensitive element test concentration range: 10 to 1000ppm
TTL output valid signal is low level, (output low signal light, which can be accessed microcontroller IO port).
Size:36mm X24mm X25mm(L * W * H)SKU: sensor_MQ135 - Accessories, Accessories, LCD, Other Module
I2C Serial Interface Board Module
This Is Another Great Iic/I2C/Twi/Spi Serial Interface
As The Pin Resources Of Arduino Controller Is Limited, Your Project May Be Not Able To Use Normal Lcd Shield After Connected With A Certain Quantity Of Sensors Or Sd Card
I2C Address: 0X20~0X27 (The Original Address Is 0X27,You Can Change It Yourself) Supply Voltage: 5V
The Backlight And Contrast Is Adjusted By Potentiometer
Come With 2 Iic Interface, Which Can Be Connected By Dupont Line Or Iic Dedicated CableSKU: board_i2c - Accessories, Other Module
CH340 USB to ESP8266 serial wireless wifi module Developent Board adapter
-26%Accessories, Other ModuleCH340 USB to ESP8266 serial wireless wifi module Developent Board adapter
USB to ESP8266 Serial Wireless Adapter
Side A: USB Type A Male
Side B: 8 Pin two rwo Serial Interface TTL
Size: 4.8*3.5cm
Esp8266 TTL to USB converter
CH340 Chipset for usb to ttl converterSKU: board_CH340